Δ STANDARD CONFIGURATION
1) Powered by original PERKINS water-cooled diesel engine.
2) PERKINS diesel engine with 12 months global warranty.
3) Original STAMFORD Single bearing alternator with insulation class H and IP23.
4) Standard CHINT or DELIXI circuit breaker, ABB as an optional.
5) Steel base fuel tank with anti-vibration mounting.
6) Based at leaset 8 hours build-in fuel tank ensure daily use.
7) Industrial 9 dB muffler exhaust system, free-maintenance battery, complete set of user's manual.
8) Flexible fuel lines and lube oil, water & fuel drain cocks.
9) Standard SMARTGEN HGM6120N antomatic start digital controller.
10) Standard Shrink wrap packing method (Plywood packing box as optional).
Δ TESTING ITEMS
GENLITEC POWER provides a full line of brand new and high quality products.
Each and every unit is strictly factory tested before shipment.
1) Parts faults testing
2) Fuel tank pressure testing
3) Bolt tightening torque testing
4) Painting thickness testing
5) Voltage bearing and insulation testing
6) Noise testing
7) Loading Testing: 25%, 50%, 75%, 100%, 110% load to check verify that all control systems, alarm and shut-down protection.
Δ OPTIONAL SUPPLY
1) Weatherproof canopy / Soundproof canopy / Trailer-mounted
2) Engine / Alternator Pre-heaters
3) Auto load sharing & synchronization panel
4) Build-in ATS (Auto start & stop Main Failure (AMF)
5) Large 12/24 hours fuel tank
6) Power output sockets
Δ SPECIFICATION
| GENSET MODEL | GPP30D5| GPP30S5 |
| Service | PRP(1) | ESP(2) |
| Power (KVA) | 25 | 28 |
| Power (KW) | 20 | 22 |
| Rated speed | 1800RPM |
| Standard voltage | 220/380, 230/400, 240/415V |
| Power factor | 0.8 |
| Phase | 3 |
| Engine brand | PERKINS |
| Engine model | 404D-22G |
| Speed control type | Mechanical |
| Alternator brand | Genlitec |
| Alternator model | S184G20 |
| Control system | SMARTGEN HGM6110N |
| Starter motor voltage | 12V |
| Frequency | 50Hz |
| Fuel Consumption (L/H) | 100% Prime Load | 5.6 |
| 75% Prime Load | 4.8 |
| 50% Prime Load | 2.9 |
| 25% Prime Load | 1.8 |
| ENGINE DATA |
| Engine model | 404D-22G |
| Cylinder number | 4 |
| Aspiration system | Air Natural aspirated |
| Cooling method | Water cooled |
| Combustion system | Indirect injection |
| Bore x Stroke (mm) | 84x100 |
| Compression ratio | 23.3 |
| Rated speed (RPM) | 1800 |
| Displacement (L) | 2.216 |
| Rated power (KW) | 21 |
| Standby power (KW) | 24.3 |
| Total system oil capacity (L) | 8.3 |
| Coolant capacity (L) | 10.2 |
| Oil consumption (g/kwh) | ≤4 |
| Charger Alternator capacity | 12V - 15A |
| Starter motor capacity | DC 24V |
| ALTERNATOR DATA |
| Alternator model | S184G20 |
| Number of phase | 3 |
| Rated power (KW/KVA) | 20KW/25KVA |
| Frequency (Hz) | 60 |
| Power factor (Cos Phi) | 0.8 |
| Poles | 4 |
| Temp. rise | 125K |
| Terminals | 12 |
| Insulation type | H class |
| Ambient temp. | 40ºC |
| IP rating | IP23 |
| Excitation system | Self-excited |
| Bearing | Single bearing |
| Coating | Vacuum impregnation |
| Voltage regulator | A.V.R |
| Coupling | Flexible di |